Blanco Basket Strainer Installation

Installing a Blanco basket strainer is not difficult, but it does require some basic plumbing skills. The Blanco basket strainer is a high-quality strainer that is designed to be easy to install and use. In this article, we’ll walk you through the steps involved in installing a Blanco basket strainer.

What You Will Need

Before you begin the installation process, make sure you have all the necessary tools and materials. Here is a list of what you will need:

  • Blanco basket strainer
  • Plumber’s putty
  • Plumber’s tape
  • Adjustable wrench
  • Screwdriver
  • Towels
  • Bucket

Step 1: Turn off the Water Supply

The first step in installing a Blanco basket strainer is to turn off the water supply to your sink. This is an important safety measure that will prevent any water from flowing while you are working on the sink.

Step 2: Remove the Old Strainer

Next, you will need to remove the old strainer from your sink. To do this, loosen the mounting nut that holds the strainer in place using an adjustable wrench. Once the nut is loose, you can remove the old strainer from the sink.

Step 3: Clean the Sink

After you have removed the old strainer, clean the sink thoroughly with a towel. Make sure there is no debris or old putty left on the sink.

Step 4: Apply Plumber’s Putty

Take some plumber’s putty and roll it into a thin ring. Place the ring around the bottom of the Blanco basket strainer. This putty will create a waterproof seal between the strainer and the sink.

Step 5: Install the Strainer

Place the Blanco basket strainer into the sink hole and press it down firmly. Make sure the strainer is level and centered in the sink hole. Then, tighten the mounting nut underneath the sink using an adjustable wrench.

Step 6: Attach the Tailpiece

The tailpiece is the pipe that connects the strainer to the drain pipe. Attach the tailpiece to the bottom of the strainer using plumber’s tape to create a watertight seal. Tighten the nut with an adjustable wrench.

Step 7: Connect the Drain Pipe

Connect the drain pipe to the tailpiece using a slip nut and washer. Tighten the nut with an adjustable wrench. Make sure the drain pipe is aligned with the tailpiece and that there are no leaks.

Step 8: Turn on the Water Supply

Turn on the water supply and check for leaks. If there are no leaks, you have successfully installed your Blanco basket strainer!

Meta Description

Learn how to install a Blanco basket strainer in this step-by-step guide. Follow these easy instructions for a quick and hassle-free installation.

Meta Keywords

Blanco basket strainer, installation, plumbing, step-by-step, easy instructions, watertight seal