Delta Kitchen Faucet Leaking at Base – How to Fix it

Introduction

Delta kitchen faucets are known for their durability and reliability. However, leaks can occur over time, especially at the base of the faucet. If you notice water leaking from the base of your Delta kitchen faucet, it’s important to take action immediately to prevent further damage. In this article, we’ll show you how to fix a Delta kitchen faucet leaking at the base.

Step 1: Turn Off the Water Supply

Before you start fixing your Delta kitchen faucet, turn off the water supply to the faucet. You can usually find the shut-off valve under the sink. Turn the valve clockwise to shut off the water supply.

Step 2: Remove the Handle

To access the inner workings of the faucet, you will need to remove the handle. Depending on the type of Delta faucet you have, you may need to remove a screw or a cap to access the handle. Use a screwdriver or a wrench to remove the screw or cap. Once the screw or cap is removed, gently pull the handle off the faucet.

Step 3: Remove the Bonnet

After removing the handle, you will need to remove the bonnet to access the cartridge. The bonnet is a small cap that covers the cartridge. Use pliers to loosen and remove the bonnet.

Step 4: Remove the Cartridge

Once you have removed the bonnet, you will be able to access the cartridge. The cartridge is the part of the faucet that controls the flow of water. Use pliers to gently pull the cartridge out of the faucet.

Step 5: Inspect the Cartridge

Inspect the cartridge for any signs of wear or damage. If the cartridge is damaged, it will need to be replaced.

Step 6: Replace the Cartridge

If the cartridge is damaged, you will need to replace it. Contact your local hardware store or Delta customer service for a replacement cartridge. Insert the new cartridge into the faucet and tighten it with pliers.

Step 7: Reassemble the Faucet

Once you have replaced the cartridge, reassemble the faucet in the reverse order that you disassembled it. Replace the bonnet, handle, and any other parts that you removed.

Step 8: Turn On the Water Supply

After reassembling the faucet, turn on the water supply to the faucet. Turn the shut-off valve counterclockwise to turn on the water supply.

Step 9: Test the Faucet

Test the faucet to make sure that it is no longer leaking. Turn on the faucet and check for any signs of water leaking from the base. If the faucet is still leaking, you may need to repeat the steps or contact Delta customer service for further assistance.

Conclusion

A Delta kitchen faucet leaking at the base can be a frustrating problem, but it can be fixed with a little patience and know-how. By following these steps, you can fix your Delta kitchen faucet and prevent further damage. Remember to turn off the water supply before starting, inspect and replace the cartridge if necessary, and reassemble the faucet carefully. With these tips, you can enjoy a leak-free Delta kitchen faucet for years to come.