Delta Shiloh Faucet Installation: A Step-by-Step Guide

Introduction

The Delta Shiloh faucet is a stylish and functional addition to any kitchen or bathroom. Installing the faucet may seem daunting, but with a little guidance, it can be done in no time. In this article, we will provide you with a step-by-step guide on how to install the Delta Shiloh faucet.

Gather Your Tools and Materials

Before you begin the installation process, you will need to gather the necessary tools and materials. You will need a basin wrench, an adjustable wrench, pliers, Teflon tape, a Phillips screwdriver, and the Delta Shiloh faucet. Make sure you have all the tools and materials before you begin the installation process.

Shut off the Water Supply

The first step in installing the Delta Shiloh faucet is to shut off the water supply. Locate the shut-off valves under the sink and turn them off. Turn on the faucet to release any remaining water in the lines.

Remove the Old Faucet

Before you can install the Delta Shiloh faucet, you will need to remove the old faucet. Use the basin wrench to loosen the nuts that hold the old faucet in place. Once the nuts are loose, remove the old faucet.

Clean the Sink Area

After removing the old faucet, clean the sink area thoroughly. Remove any old putty or caulk from the sink surface.

Install the Base Plate

The next step is to install the base plate of the Delta Shiloh faucet. Place the base plate on the sink surface and align it with the mounting holes. Insert the mounting screws through the mounting holes and tighten them with a Phillips screwdriver.

Attach the Water Supply Lines

Attach the water supply lines to the faucet. Apply Teflon tape to the threads of the water supply lines to prevent leaks. Tighten the nuts with pliers or an adjustable wrench.

Install the Faucet

With the base plate and water supply lines in place, it’s time to install the Delta Shiloh faucet. Insert the faucet into the base plate and align it with the mounting holes. Secure the faucet with the mounting screws and tighten them with a Phillips screwdriver.

Connect the Handle

Attach the handle to the faucet by inserting the set screw into the hole on the handle base. Tighten the set screw with an Allen wrench.

Install the Sprayer

If your Delta Shiloh faucet comes with a sprayer, install it now. Insert the sprayer hose through the mounting hole on the sink and connect it to the faucet. Tighten the nut with pliers or an adjustable wrench.

Connect the Sprayer Hose

Connect the sprayer hose to the water supply line. Apply Teflon tape to the threads of the water supply line to prevent leaks. Tighten the nut with pliers or an adjustable wrench.

Test the Faucet

Once you have completed the installation process, turn on the water supply and test the faucet. Make sure there are no leaks and that the water flows smoothly.

Final Adjustments

If necessary, make final adjustments to the faucet. Tighten any loose connections and adjust the handles or sprayer as needed.

Clean Up

Clean up any debris or tools from the installation area. Dispose of any old materials or parts properly.

Conclusion

Installing the Delta Shiloh faucet may seem intimidating, but with this step-by-step guide, you can do it yourself. Follow the instructions carefully and take your time to ensure a successful installation. Enjoy your new Delta Shiloh faucet and the benefits it brings to your kitchen or bathroom.