Introduction
Are you planning to install Eklipse cabinets in your home? Eklipse cabinets are the perfect solution for modern and stylish homes. They are easy to install and come in a variety of colors and styles to choose from. In this article, we’ll guide you on how to install Eklipse cabinets step-by-step.
Things You’ll Need
Before you start the installation process, you’ll need a few things. Here’s a list of things you’ll need:
- Eklipse cabinets
- Screwdriver
- Measuring tape
- Level
- Pencil
- Drill
- Wall anchors
- Mounting brackets
- Screws
Step-by-Step Guide
Follow these steps to install Eklipse cabinets:
Step 1: Measure and Mark
The first step is to measure and mark the wall where you want to install the cabinets. Use a measuring tape to measure the width and height of the wall. Then, mark the center point of the wall with a pencil.
Step 2: Install Mounting Brackets
Next, install the mounting brackets on the wall. Use a level to ensure that the brackets are straight. Make sure to use wall anchors if you’re not drilling into a stud. The mounting brackets should be installed at the same height and level as the center point mark.
Step 3: Install the Cabinets
Once the mounting brackets are installed, it’s time to install the cabinets. Start by removing the cabinet doors and drawers. Then, place the cabinets on the mounting brackets and secure them with screws.
Step 4: Level the Cabinets
Use a level to ensure that the cabinets are level. Adjust the mounting brackets as needed to ensure that the cabinets are level.
Step 5: Install the Cabinet Doors and Drawers
Once the cabinets are installed and level, it’s time to install the cabinet doors and drawers. Use the screws provided to attach the doors and drawers to the cabinets.
Step 6: Finishing Touches
Finally, add the finishing touches to your cabinets by installing the handles and knobs. Use a screwdriver to attach the handles and knobs to the doors and drawers.
Tips and Tricks
Here are some tips and tricks to help you with Eklipse cabinet installation:
- Make sure to measure the wall and mark the center point accurately.
- Use a level to ensure that the cabinets are level.
- If you’re not drilling into a stud, use wall anchors to ensure that the mounting brackets are secure.
- Double-check the measurements before drilling and screwing anything into the wall.
- Follow the manufacturer’s instructions carefully.
Conclusion
Installing Eklipse cabinets is a simple and straightforward process. By following these steps, you can have your cabinets installed in no time. Remember to measure accurately, use a level, and follow the manufacturer’s instructions carefully. With these tips and tricks, you can have stylish and functional cabinets in your home.