Beyond Bending Tell You How
Introduction
A broken kitchen drawer can be frustrating, especially if it’s one that you use frequently. Fortunately, fixing a broken drawer is often a simple task that you can do yourself. In this article, we’ll walk you through the steps you need to take to fix a broken kitchen drawer.
Step 1: Identify the Problem
Before you can fix a broken kitchen drawer, you need to identify what the problem is. Some common issues with kitchen drawers include:- The drawer won’t open or close smoothly- The drawer slides are broken or damaged- The drawer front is loose or coming off- The drawer bottom is sagging or crackedOnce you know what the problem is, you can move on to the next step.
Step 2: Remove the Drawer
To fix a broken kitchen drawer, you’ll need to remove it from the cabinet. This will give you better access to the problem area and make it easier to work on. To remove the drawer, follow these steps:1. Open the drawer as far as it will go.2. Look for clips or levers on the drawer slides that hold the drawer in place.3. Push or release the clips or levers to release the drawer from the slides.4. Lift the drawer up and out of the cabinet.
Step 3: Fix the Problem
Once you have the drawer out of the cabinet, you can begin to fix the problem. The specific steps you’ll need to take will depend on what the problem is. Here are some common issues and how to fix them:- The drawer won’t open or close smoothly: Check the slides for debris or damage. Clean the slides with a cloth and lubricate them with a silicone spray if necessary. If the slides are damaged, replace them.- The drawer slides are broken or damaged: Remove the old slides and replace them with new ones. Slides are available at hardware stores and online.- The drawer front is loose or coming off: Tighten any loose screws or glue the front back in place.- The drawer bottom is sagging or cracked: Remove the drawer bottom and replace it with a new one. Drawer bottoms can be found at hardware stores and online.
Step 4: Reinstall the Drawer
Once you’ve fixed the problem, you can reinstall the drawer. To do this, follow these steps:1. Place the drawer back into the cabinet.2. Align the drawer slides with the corresponding slides in the cabinet.3. Push the drawer all the way back until it clicks into place.4. Test the drawer to make sure it opens and closes smoothly.
Conclusion
Fixing a broken kitchen drawer is a simple task that can save you money and frustration. By following these steps, you can identify the problem, fix it, and reinstall the drawer in no time. With a little bit of effort, your kitchen drawer will be as good as new.
