How to Take a Sectional Apart: A Step-by-Step Guide

If you’re moving to a new place or simply want to rearrange your living room, you may need to disassemble your sectional sofa. Taking apart a sectional can be daunting, especially if it’s your first time. However, with the right tools and techniques, it’s possible to break it down into manageable pieces. Here’s how:

Step 1: Clear the Area

Before you start, make sure you have enough space to work in. Move any obstacles out of the way, and create a clear path from the sofa to the door. This will make it easier to maneuver the individual pieces.

Step 2: Remove the Cushions

The first thing you need to do is remove the cushions. This will give you access to the frame and make it easier to disassemble. Take off all the seat, back, and throw pillows, and set them aside.

Step 3: Locate the Connectors

Next, locate the connectors that hold the sectional together. Most sectionals have metal brackets or clips that connect the pieces. Look for them on the bottom of the frame, near the corners.

Step 4: Unscrew the Connectors

Using a screwdriver or drill, unscrew the connectors from the frame. Take care not to strip the screws or damage the brackets. If the connectors are stuck, you may need to use a hammer or pry bar to loosen them.

Step 5: Separate the Pieces

Once the connectors are removed, you can start separating the pieces. Lift each section away from the others, and place them on the floor or against a wall. It’s best to have a helper for this step, as some sections can be heavy and awkward to handle.

Step 6: Label the Pieces

To make reassembly easier, label each piece with its location and orientation. You can use masking tape or a marker to write on the fabric or frame. This will help you remember which section goes where and which side is up.

Step 7: Wrap and Protect

Before you move the pieces, wrap them in blankets or plastic to protect them from scratches and damage. You can also use furniture pads or bubble wrap to cushion the corners and edges.

Step 8: Move the Pieces

Now it’s time to move the pieces to their new location. Depending on the size of your sectional, you may need a dolly or hand truck to transport them. Be sure to lift with your legs, not your back, to avoid injury.

Step 9: Reassemble the Sectional

Once you have the pieces in their new location, you can start reassembling the sectional. Use the labels you made earlier to guide you, and reattach the connectors to hold the pieces together. Check that each section is flush and level before tightening the screws.

Step 10: Replace the Cushions

Finally, replace the cushions on the sectional. Fluff them up, and adjust them as needed for a comfortable fit. Congratulations, you’ve successfully taken apart and reassembled your sectional sofa!

Overall, disassembling a sectional sofa requires patience, attention to detail, and careful handling. If you’re not comfortable doing it yourself, consider hiring a professional mover or furniture assembler. With the right preparation and tools, however, you can save money and enjoy the satisfaction of a job well done.

Related video of How to Take a Sectional Apart: A Step-by-Step Guide