How to Take Apart a 1911 .45

When it comes to firearms, the 1911 .45 is one of the most iconic and popular models. Whether you are a gun enthusiast, collector or just an owner, knowing how to take apart your 1911 .45 is essential. In this article, we will guide you through the process of disassembling this firearm step by step.

Gather the Necessary Tools

Before you start the disassembly process, you will need to gather the necessary tools. These include a screwdriver, a bushing wrench, a hammer, and a disassembly mat or a clean cloth to lay your gun on.

Clear Your Firearm

The first step you need to take is to clear your firearm. Make sure that there are no rounds in the chamber and remove the magazine. Then, check the chamber again to ensure that it is empty.

Remove the Slide

Next, use your bushing wrench to turn the barrel bushing counterclockwise until it is loose enough to remove. Then, pull the slide back slightly and lift it off the frame. Be careful not to let the recoil spring and guide rod fly out.

Disassemble the Slide

Now that you have removed the slide, you can start disassembling it. To do this, push down on the recoil spring plug and turn it counterclockwise until you can remove it. Then, carefully remove the recoil spring and guide rod. Finally, remove the barrel from the slide.

Disassemble the Frame

The next step is to disassemble the frame. First, remove the mainspring housing by using a screwdriver to remove the mainspring housing pin. Then, remove the mainspring housing and the mainspring itself. Finally, remove the grip safety and the hammer.

Clean Your Firearm

Now that you have disassembled your firearm, it is time to clean it. Use your preferred cleaning kit to clean all the parts thoroughly. Make sure to remove any debris or dirt that may have accumulated in the firearm.

Reassemble Your Firearm

Once you have cleaned your firearm, it is time to reassemble it. Start by reassembling the frame in reverse order. Then, reassemble the slide by placing the barrel in the slide and putting the recoil spring and guide rod back in place. Finally, put the slide back on the frame and turn the barrel bushing clockwise until it is tight.

People Also Ask

Q: How often should I clean my 1911 .45?

A: It is recommended that you clean your 1911 .45 after every use to ensure that it functions properly.

Q: Can I disassemble my 1911 .45 without any tools?

A: No, you will need a screwdriver, a bushing wrench, and a hammer to disassemble your 1911 .45.

Q: What is the best way to clean a 1911 .45?

A: The best way to clean a 1911 .45 is to use a cleaning kit specifically designed for firearms. Make sure to follow the manufacturer’s instructions carefully.

Related video of How to Take Apart a 1911 .45