How to Take Apart a Lasko Fan

If you have a Lasko fan that needs cleaning or repair, taking it apart may seem like a daunting task. However, with some basic tools and careful attention, you can disassemble your fan with ease. In this article, we will guide you through the process of taking apart a Lasko fan step by step.

Gather the Tools You Need

Before you begin disassembling your Lasko fan, you will need to gather the necessary tools. These include a screwdriver, pliers, and a clean cloth. You may also need a small brush or compressed air to clean the fan blades and other parts.

Unplug the Fan

Before you start taking apart the fan, make sure it’s unplugged to avoid any electrical shock or injury. If your fan has a remote control, remove the batteries as well.

Remove the Front Grill

The front grill of a Lasko fan is held in place by clips or screws. To remove it, look for these clips or screws around the edge of the grill. Use your pliers or screwdriver to remove them, and then gently pull the grill away from the fan.

Take Apart the Blade and Motor Housing

Once the front grill is removed, you’ll be able to access the fan blade and motor. Use your screwdriver to remove any screws holding the blade and motor housing in place. Carefully lift the blade and motor housing away from the fan, taking care not to damage any wires or components.

Remove the Rear Grill

The rear grill of a Lasko fan is usually held in place by screws. Use your screwdriver to remove these screws, and then gently pull the grill away from the fan.

Take Apart the Motor

To access the motor, you’ll need to remove the clips or screws holding it in place. Use your pliers or screwdriver to remove these, and then carefully lift the motor out of the fan.

Clean the Fan Parts

Once you’ve disassembled your Lasko fan, you can clean each part thoroughly. Use a clean cloth to wipe down the grills, blades, and housing. You may also use a brush or compressed air to remove any dust or debris from the fan blades and other components.

Reassemble the Fan

After cleaning your Lasko fan, it’s time to put it back together. Follow the steps above in reverse order, making sure each part is securely in place. Once you’ve reassembled the fan, plug it in and test it to make sure it’s working properly.

By following these simple steps, you can easily take apart and clean your Lasko fan. Remember to always unplug the fan before you begin, and be careful not to damage any wires or components. With a little effort, your fan will be running like new again in no time!

Related video of How to Take Apart a Lasko Fan