How to Take Apart a NordicTrack Treadmill

If you’re looking to move your NordicTrack treadmill or you need to perform repairs, you may need to take it apart. While it may seem like a daunting task, with the right tools and instructions, disassembling your treadmill can be done efficiently and safely. Here’s a step-by-step guide on how to take apart your NordicTrack treadmill.

Gather Your Tools

Before you start disassembling your treadmill, it’s important to have the necessary tools on hand. You’ll need a set of Allen wrenches, a Phillips screwdriver, pliers, and a rubber mallet. Make sure to also have a spacious and clean area to work on.

Step One: Unplug the Treadmill

The first step in disassembling your NordicTrack treadmill is to unplug it from the power source. This will ensure your safety and prevent any electrical damage to the machine.

Step Two: Remove the Console

Use your Phillips screwdriver to remove the screws that hold the console in place. Once the screws are removed, gently lift the console away from the treadmill and disconnect any wires that connect it to the machine.

Step Three: Remove the Side Rails and Handrails

Use your Allen wrench to remove the bolts on the side rails and handrails. Once the bolts are removed, gently lift the rails away from the treadmill.

Step Four: Remove the Rear Roller

Locate the rear roller at the back of the treadmill. Use your Allen wrench to remove the bolts holding the roller in place. Once the bolts are removed, gently lift the roller out of the treadmill.

Step Five: Remove the Front Roller

Locate the front roller at the front of the treadmill. Use your Allen wrench to remove the bolts holding the roller in place. Once the bolts are removed, gently lift the roller out of the treadmill.

Step Six: Remove the Walking Belt

Use your pliers to remove the screws holding the walking belt in place. Once the screws are removed, lift the walking belt off the treadmill.

Step Seven: Remove the Motor

Locate the motor at the base of the treadmill. Use your Allen wrench to remove the bolts holding the motor in place. Once the bolts are removed, gently lift the motor out of the treadmill.

Step Eight: Disassemble the Base

Use your Allen wrench to remove the bolts holding the base of the treadmill together. Once the bolts are removed, carefully disassemble the base into its individual parts.

Step Nine: Disassemble the Incline Motor

If your treadmill has an incline motor, use your Allen wrench to remove the bolts holding it in place. Once the bolts are removed, gently lift the motor out of the treadmill.

Step Ten: Clean and Pack the Parts

Clean all the parts of your disassembled treadmill and pack them carefully for easy transport or storage.

Now that you know how to take apart your NordicTrack treadmill, you can move it with ease or perform any necessary repairs. Always remember to take your time and follow the instructions carefully to ensure your safety and prevent any damage to the machine.

Related video of How to Take Apart a NordicTrack Treadmill