How to Take Apart Bissell Turboclean Powerbrush Pet

If you own a Bissell Turboclean Powerbrush Pet, you may need to take it apart from time to time to clean it or replace some parts. Taking apart the machine might seem intimidating, especially if you’re not familiar with how it works. However, with the right tools and some basic knowledge, you can easily disassemble your Bissell Turboclean Powerbrush Pet and put it back together again. In this article, we’ll guide you through the step-by-step process of taking apart your Bissell Turboclean Powerbrush Pet.

Step 1: Gather the tools you need

Before you start taking apart your Bissell Turboclean Powerbrush Pet, make sure you have all the necessary tools. You’ll need a screwdriver, pliers, and a clean cloth. You may also need a pair of scissors or a knife to cut tangled hair or debris from the brush roll.

Step 2: Remove the clean water tank

The first step in taking apart your Bissell Turboclean Powerbrush Pet is to remove the clean water tank. To do this, press the tank release button on the top of the machine and lift the tank straight up and out of the machine. Set the tank aside.

Step 3: Remove the dirty water tank

Next, remove the dirty water tank. To do this, press the tank release button on the back of the machine and lift the tank straight up and out of the machine. Set the tank aside.

Step 4: Remove the nozzle

The nozzle is the part of the machine that sucks up dirt and debris from your carpets and floors. To remove the nozzle, first, remove the brush roll cover by pressing the release button and lifting it off. Then, use a screwdriver to remove the two screws that hold the nozzle in place. Once the screws are removed, you can lift the nozzle straight up and off the machine.

Step 5: Remove the brush roll

The brush roll is the part of the machine that rotates and agitates the carpet fibers. To remove the brush roll, use a screwdriver to remove the two screws that hold it in place. Once the screws are removed, you can lift the brush roll straight up and out of the machine.

Step 6: Clean the brush roll

With the brush roll removed, you can clean it thoroughly. Use a clean cloth to wipe away any debris, and use scissors or a knife to cut away any tangled hair or fibers.

Step 7: Clean the nozzle

With the brush roll removed, you can also clean the nozzle thoroughly. Use a clean cloth to wipe away any debris or dirt.

Step 8: Reassemble the brush roll and nozzle

Once you’ve cleaned the brush roll and nozzle, you can reassemble them. Place the brush roll back into the nozzle and secure it with the two screws. Then, place the nozzle back onto the machine and secure it with the two screws.

Step 9: Reassemble the dirty water tank

Place the dirty water tank back onto the machine and press it down until you hear a click. Then, make sure the tank release button on the back of the machine is in the “locked” position.

Step 10: Reassemble the clean water tank

Place the clean water tank back onto the machine and press it down until you hear a click. Then, make sure the tank release button on the top of the machine is in the “locked” position.

Now that you’ve reassembled your Bissell Turboclean Powerbrush Pet, you can fill the clean water tank with water and cleaning solution and start cleaning your carpets and floors again.

People also ask:

Q: Can I wash the brush roll of my Bissell Turboclean Powerbrush Pet?

A: Yes, you can wash the brush roll with warm water and soap. Make sure to dry it thoroughly before reassembling it.

Q: How often should I clean my Bissell Turboclean Powerbrush Pet?

A: It’s recommended to clean your Bissell Turboclean Powerbrush Pet after every use to maintain its performance and prolong its lifespan.

Related video of How to Take Apart Bissell Turboclean Powerbrush Pet