How to Take Apart Dyson V8

If you own a Dyson V8 vacuum cleaner, there may come a time when you need to take it apart for maintenance or repair. This process can seem daunting, but with the right tools and techniques, it’s relatively straightforward. Here’s a step-by-step guide on how to take apart your Dyson V8.

Gather Your Tools

Before you begin disassembling your Dyson V8, it’s essential to have the right tools on hand. You will need a Torx screwdriver set, a flathead screwdriver, pliers, and a pair of scissors. These tools will help you remove the various screws, clips, and other components that hold the vacuum cleaner together.

Step 1: Remove the Battery

The first step in taking apart your Dyson V8 is to remove the battery. To do this, press the release button located on the battery pack and slide it out of the vacuum cleaner. Set the battery aside in a safe place.

Step 2: Remove the Dustbin

Next, remove the dustbin by pressing the release button located near the top of the bin. Once the bin is released, pull it out of the vacuum cleaner and set it aside.

Step 3: Remove the Filter

With the dustbin removed, you’ll have access to the filter. To remove it, twist the filter counterclockwise and lift it out of the vacuum cleaner. Be sure to clean or replace the filter as needed before reassembling your Dyson V8.

Step 4: Remove the Wand

To remove the wand, press the release button located near the base of the wand and pull it out of the vacuum cleaner. The wand can be separated into two pieces by pressing the release button located near the middle of the wand.

Step 5: Remove the Brush Bar

The brush bar can be removed by using a flathead screwdriver to remove the end cap located near the brush bar. Once the end cap is removed, you can slide the brush bar out of the vacuum cleaner.

Step 6: Remove the Motor

To remove the motor, use the Torx screwdriver to remove the screws located near the motor. Once the screws are removed, you can lift the motor out of the vacuum cleaner.

Step 7: Remove the Cyclone

The cyclone can be removed by using pliers to remove the screw located near the base of the cyclone. Once the screw is removed, you can lift the cyclone out of the vacuum cleaner.

Step 8: Remove the Bin Base

To remove the bin base, use the Torx screwdriver to remove the screws located near the base of the vacuum cleaner. Once the screws are removed, you can lift the bin base out of the vacuum cleaner.

Step 9: Remove the Hose

The hose can be removed by using a pair of scissors to cut the zip tie located near the base of the hose. Once the zip tie is cut, you can slide the hose out of the vacuum cleaner.

Step 10: Remove the Switch

The switch can be removed by using the Torx screwdriver to remove the screws located near the switch. Once the screws are removed, you can lift the switch out of the vacuum cleaner.

By following these steps, you can take apart your Dyson V8 for maintenance or repair. Remember to keep track of all the screws and components you remove and take photos to ensure you can put your vacuum cleaner back together correctly.

Related video of How to Take Apart Dyson V8