Introduction
If you are planning to install IKEA Utrusta hinges, it is important to ensure that you have all the necessary tools and materials for the job. The Utrusta hinge system is designed to work with the IKEA SEKTION kitchen cabinets and is known for its durability and ease of installation. In this article, we will walk you through the process of installing IKEA Utrusta hinges, step by step.
Step 1: Gather Your Tools and Materials
Before you begin the installation process, it is important to gather all the necessary tools and materials. You will need a drill, a screwdriver, a measuring tape, a pencil, and the IKEA Utrusta hinge system. Make sure that you have all the necessary screws and mounting plates that come with the hinge system.
Step 2: Remove the Cabinet Doors
To start the installation process, you need to remove the cabinet doors. Open the cabinet doors and locate the hinge that attaches the door to the cabinet. Using a screwdriver, remove the screws that hold the hinge in place. Once the screws are removed, lift the door off the cabinet and set it aside.
Step 3: Install the Mounting Plate
The next step is to install the mounting plate onto the cabinet. The mounting plate should be placed in the center of the cabinet where the door hinge was previously attached. Use a measuring tape to ensure that the mounting plate is placed at the correct height. Once the mounting plate is in place, use a drill to screw it into the cabinet.
Step 4: Install the Hinge Cup
The next step is to install the hinge cup onto the door. The hinge cup should be placed at the same height as the mounting plate on the cabinet. Use a pencil to mark the position of the hinge cup on the door. Then, using a drill, make a hole in the door at the marked position. Once the hole is made, insert the hinge cup into the hole and secure it with screws.
Step 5: Attach the Hinge to the Mounting Plate
The next step is to attach the hinge to the mounting plate on the cabinet. The hinge should be attached to the mounting plate using screws that come with the Utrusta hinge system. Make sure that the hinge is securely attached to the mounting plate.
Step 6: Attach the Hinge Cup to the Hinge
The next step is to attach the hinge cup to the hinge on the cabinet. The hinge cup should be attached to the hinge using screws that come with the Utrusta hinge system. Make sure that the hinge cup is securely attached to the hinge.
Step 7: Attach the Door to the Hinge
The final step is to attach the door to the hinge on the cabinet. Lift the door and align the hinge cup with the hinge on the cabinet. Then, push the door into place and make sure that it is securely attached to the hinge.
Conclusion
Installing IKEA Utrusta hinges is a relatively simple process that can be completed with just a few tools and materials. By following the steps outlined in this article, you can ensure that your Utrusta hinge installation is a success. With proper installation, your Utrusta hinges will provide years of reliable service and make your kitchen cabinets more functional and convenient.