Beyond Bending Tell You How
Installing cabinet door hinges may seem like a daunting task, but with the right tools and some basic know-how, it can be done easily and quickly. In this article, we will guide you through the process of installing cabinet door hinges in a step-by-step manner, so that you can do it easily and efficiently.
Tools Needed
Before we begin, let’s gather the tools that we need:
- Power drill
- Drill bit
- Screwdriver
- Measuring tape
- Hinges
- Screws
Step 1: Remove Old Hinges
The first step in installing cabinet door hinges is to remove the old hinges. Use a screwdriver to unscrew the old hinges from the cabinet door and the cabinet frame. Be careful not to damage the cabinet door or the frame while removing the old hinges.
Step 2: Measure and Mark Hinge Placement
Measure and mark the placement of the new hinges on both the cabinet door and the cabinet frame. Use a measuring tape to ensure that the hinges are placed at the same height on both the door and the frame.
Step 3: Drill Pilot Holes
Using a power drill and a drill bit that is slightly smaller than the screws that came with the hinges, drill pilot holes for the screws on both the cabinet door and the cabinet frame. This will help prevent the wood from splitting when you screw in the screws.
Step 4: Install the Hinges on the Cabinet Frame
Place the hinges on the cabinet frame and screw them in place using the screws that came with the hinges. Make sure that the hinges are flush against the frame and that they are level.
Step 5: Install the Hinges on the Cabinet Door
Place the hinges on the cabinet door and screw them in place using the screws that came with the hinges. Make sure that the hinges are flush against the door and that they are level.
Step 6: Test the Door
Test the door to make sure that it opens and closes smoothly. If the door is rubbing against the frame or not closing properly, adjust the hinges until the door operates smoothly.
Step 7: Adjust the Hinges
If the door is not level, adjust the hinges until it is level. Use a level to ensure that the door is level when it is closed. If the door is not flush against the frame, adjust the hinges until it is flush against the frame.
Step 8: Install Additional Hinges
If you are installing more than two hinges on the cabinet door, repeat steps 2-7 for each additional hinge.
Step 9: Add Finishing Touches
Once the hinges are installed, add any finishing touches that you desire, such as decorative knobs or handles.
Conclusion
Installing cabinet door hinges may seem daunting, but it can be done easily and quickly with the right tools and some basic know-how. By following these simple steps, you can install cabinet door hinges like a pro and have your cabinets looking great in no time!
