Beyond Bending Tell You How
Introduction
Are you planning to renovate your kitchen? One of the essential elements that you should consider is the installation of base cabinets. Base cabinets provide storage space and add aesthetic appeal to your kitchen. However, installing them can be a daunting task, especially if you’re not familiar with carpentry. In this article, we’ll guide you through the process of installing kitchen base cabinets.
Tools and Materials Needed
Before you begin installing your kitchen base cabinets, you need to ensure that you have all the necessary tools and materials. Here are the things that you’ll need:- Tape measure- Level- Drill- Screwdriver- Stud finder- Wood shims- Cabinet screws- Base cabinets- Cabinet filler strips
Step 1: Measure and Mark the Wall
The first step in installing kitchen base cabinets is to measure and mark the wall where you want to install them. Use a tape measure to measure the length of the wall and mark the center point. You’ll use this center point as a reference when you install the cabinets.
Step 2: Locate the Studs
Once you’ve marked the center point, use a stud finder to locate the studs on the wall. The studs are essential because they provide support for the cabinets. Mark the location of the studs with a pencil.
Step 3: Install the Filler Strips
Before you install the cabinets, you need to install filler strips on the wall. The filler strips are necessary because they provide a base for the cabinets and help to level them. Cut the filler strips to the height of the cabinets and attach them to the wall using screws.
Step 4: Install the Cabinets
Once you’ve installed the filler strips, you can now install the base cabinets. Start by placing the first cabinet against the wall and aligning it with the center point that you marked earlier. Use a level to ensure that the cabinet is level and adjust it using wood shims if necessary.
Step 5: Secure the Cabinets
After you’ve ensured that the cabinet is level, secure it to the wall using cabinet screws. Drill pilot holes into the studs and then screw the cabinet into place.
Step 6: Install the Next Cabinet
Repeat the process for the next cabinet. Place it next to the first cabinet, align it with the center point, and ensure that it’s level. Secure it to the wall using cabinet screws.
Step 7: Install the Remaining Cabinets
Once you’ve installed the first two cabinets, you can now install the remaining cabinets. Follow the same process and ensure that each cabinet is level before securing it to the wall.
Step 8: Install the Cabinet Doors and Drawers
After you’ve installed all the cabinets, you can now install the cabinet doors and drawers. Follow the manufacturer’s instructions to attach them to the cabinets.
Step 9: Finish the Installation
Finally, finish the installation by adding any finishing touches, such as crown molding or trim. Ensure that everything is level and secure before using your new kitchen base cabinets.
Conclusion
Installing kitchen base cabinets can be a challenging task, but with the right tools and materials, you can do it yourself. Follow the step-by-step guide above to ensure that your cabinets are installed correctly and are level. With proper installation, your new kitchen base cabinets will provide you with years of storage space and aesthetic appeal.
