If you have a Moen Brecklyn kitchen faucet and you notice that it is leaking at the base, you may be wondering what you can do to fix the problem. Fortunately, there are a few steps that you can take to address this issue and get your faucet working properly again. In this article, we will provide you with a step-by-step guide to help you fix your leaking Moen Brecklyn kitchen faucet.
Step 1: Turn off the Water Supply
Before you begin any work on your Moen Brecklyn kitchen faucet, you need to turn off the water supply to the faucet. This will prevent water from flowing through the faucet while you are working on it, and it will help you avoid any potential water damage or flooding. To turn off the water supply, locate the shut-off valve underneath the sink and turn it to the “off” position.
Step 2: Remove the Handle
Once the water supply is turned off, you can begin to remove the handle of the Moen Brecklyn kitchen faucet. To do this, locate the set screw on the handle and use an Allen wrench to remove it. Once the set screw is removed, you can lift the handle off of the faucet.
Step 3: Remove the Escutcheon Plate
With the handle removed, you can now remove the escutcheon plate from the faucet. Use a screwdriver to remove the screws holding the plate in place, and then lift the plate off of the faucet.
Step 4: Remove the Retainer Clip
Underneath the escutcheon plate, you will see a retainer clip holding the cartridge in place. Use pliers to remove the retainer clip, and then pull the cartridge out of the faucet.
Step 5: Replace the O-Rings
Once you have removed the cartridge, you will be able to see the O-rings at the base of the faucet. These O-rings may be the cause of the leaking, so you will need to replace them. Use a small screwdriver to remove the old O-rings, and then replace them with new ones.
Step 6: Reassemble the Faucet
With the new O-rings in place, you can now reassemble the Moen Brecklyn kitchen faucet. Replace the cartridge and retainer clip, and then replace the escutcheon plate and handle. Tighten the screws holding the plate in place, and then replace the set screw on the handle.
Step 7: Turn on the Water Supply
Once you have reassembled the Moen Brecklyn kitchen faucet, you can turn the water supply back on. Test the faucet to make sure that it is no longer leaking at the base.
Conclusion
Fixing a Moen Brecklyn kitchen faucet that is leaking at the base is a relatively simple process that you can do yourself. By following the steps outlined in this article, you should be able to address the problem and get your faucet working properly again in no time.