Pull Chain Kitchen Exhaust Fan Repair

If you have a pull chain kitchen exhaust fan and it is not working properly, it can be frustrating. However, repairing it yourself can save you time and money. Here is a step-by-step guide on how to repair your pull chain kitchen exhaust fan.

Step 1: Turn off the Power

The first step to repairing your pull chain kitchen exhaust fan is to turn off the power. Locate the circuit breaker that controls the fan and turn it off. Make sure to test the fan to ensure that the power is off before proceeding with the repair.

Step 2: Remove the Cover

Next, remove the cover from the fan. You may need a screwdriver to do this. Be careful not to damage the cover or the fan itself. Once the cover is removed, you should be able to access the fan blades and motor.

Step 3: Check the Motor

Check the motor to see if it is functioning properly. If it is not, you may need to replace the motor. However, if the motor is working fine, you may need to check the pull chain switch.

Step 4: Check the Pull Chain Switch

The pull chain switch is located inside the fan. You will need to remove the switch housing to access it. You can do this by gently prying it open with a screwdriver. Once the switch housing is removed, you should be able to see the pull chain switch.

Step 5: Test the Pull Chain Switch

Test the pull chain switch by pulling the chain. If the switch is not working properly, you may need to replace it. You can purchase a new pull chain switch at a hardware store or online.

Step 6: Replace the Pull Chain Switch

If you need to replace the pull chain switch, make sure to buy the same type and size as the old switch. Once you have the new switch, you can install it by connecting the wires to the switch and mounting it back into the switch housing.

Step 7: Reassemble the Fan

After you have replaced the pull chain switch, reassemble the fan. Make sure all the screws are tightened and the cover is securely in place.

Step 8: Turn on the Power

Once you have reassembled the fan, turn on the power to test it. Pull the chain to see if the fan turns on and off properly. If it does, you have successfully repaired your pull chain kitchen exhaust fan.

Conclusion

Repairing your pull chain kitchen exhaust fan can be a simple and cost-effective solution. By following these easy steps, you can save time and money by fixing the fan yourself. Remember to always turn off the power before attempting any repairs and to test the fan before and after the repair to ensure it is working properly.