Are you tired of looking at your old, worn-out kitchen cabinet base? Do you want to give your kitchen a fresh new look without breaking the bank? Rebuilding your kitchen cabinet base is a great way to achieve this goal. In this article, we will provide you with a step-by-step guide on how to rebuild your kitchen cabinet base.
Step 1: Remove the Old Cabinet Base
The first step in rebuilding your kitchen cabinet base is to remove the old cabinet base. This can be done by unscrewing the cabinets from the wall and unscrewing the base from the cabinets. You may need a friend to help you with this step, as the cabinets can be heavy and awkward to move.
Step 2: Measure and Cut the New Base
Once you have removed the old cabinet base, you will need to measure the space where the new base will be installed. Use a measuring tape to measure the width and depth of the space. Next, use a saw to cut the new base to the correct size. Make sure to double-check your measurements before cutting.
Step 3: Install the New Base
Now it’s time to install the new base. Place the new base in the correct position and use screws to secure it to the cabinets. Make sure the base is level and flush with the cabinets. If needed, use shims to adjust the levelness of the base.
Step 4: Install the Toe Kick
The toe kick is the panel that covers the gap between the bottom of the cabinet and the floor. To install the toe kick, measure and cut the panel to the correct size. Then, attach it to the base using screws.
Step 5: Install the Cabinet Doors and Drawers
Finally, it’s time to install the cabinet doors and drawers. Attach the hinges to the doors and screw them into place. For the drawers, attach the slides to the sides of the drawers and then attach them to the cabinet. Make sure that the doors and drawers are level and flush with the cabinets.
Conclusion
Rebuilding your kitchen cabinet base is not as difficult as it may seem. By following these simple steps, you can give your kitchen a fresh new look without spending a lot of money. Remember to measure twice and cut once, and you’ll have a beautiful new kitchen cabinet base in no time.