Replacing Igniter on Gas Oven

Introduction

If you are experiencing issues with your gas oven not igniting or not heating up properly, the problem could be a faulty igniter. Igniters are an important component of gas ovens that helps to ignite the gas and create heat. If your oven’s igniter is faulty, it needs to be replaced. In this article, we will discuss the steps involved in replacing the igniter on a gas oven.

Step 1: Safety Precautions

Before you begin any repair work on your gas oven, it is essential to take safety precautions. Turn off the gas supply to the oven and unplug it from the electrical outlet. Make sure the oven has cooled down before you begin any repair work.

Step 2: Accessing the Igniter

To access the igniter, you need to remove the bottom panel of the oven. This panel is usually held in place by a few screws. Once you remove the screws, gently pull out the panel and set it aside.

Step 3: Removing the Old Igniter

The igniter is usually located at the back of the oven near the burner. It is connected to a mounting bracket with a couple of screws. Remove the screws and gently pull out the igniter from the bracket. Make sure you disconnect the wires from the igniter by gently pulling them away from the connector.

Step 4: Installing the New Igniter

Once you have removed the old igniter, it’s time to install the new one. Place the new igniter onto the mounting bracket and secure it with the screws. Connect the wires to the new igniter by attaching them to the connector.

Step 5: Reassembling the Oven

After you have installed the new igniter, it’s time to reassemble the oven. First, replace the bottom panel of the oven and secure it with the screws. Next, plug the oven back into the electrical outlet and turn on the gas supply.

Step 6: Testing the New Igniter

To test the new igniter, turn on the oven and set it to the desired temperature. If the igniter is working correctly, you should see a glow coming from it. The oven should also heat up to the desired temperature.

Conclusion

Replacing the igniter on a gas oven is a relatively simple task that can be done with a few basic tools. However, if you are not comfortable working with gas appliances, it’s best to seek the help of a professional. By following the steps outlined in this article, you can replace the igniter and get your oven working properly again.