Introduction
If you’re experiencing leaks or other issues with your Delta kitchen or bathroom faucet, it may be time for a new RP50587 cartridge. This replacement part is designed to fit a variety of Delta faucet models and can help restore your faucet to proper functionality. In this article, we’ll provide a step-by-step guide for replacing the RP50587 cartridge.
Tools Needed
Before getting started, you’ll need a few tools to complete the RP50587 replacement process. These include:- Adjustable wrench- Phillips-head screwdriver- Needle-nose pliers- Replacement RP50587 cartridge
Step 1: Turn Off the Water
The first step in replacing your Delta faucet’s RP50587 cartridge is to turn off the water supply to the faucet. Look for the shutoff valves under the sink and turn them clockwise to shut off the water.
Step 2: Remove the Handle
Using a Phillips-head screwdriver, remove the screw that holds the faucet handle in place. Once the screw is removed, gently lift the handle off of the faucet.
Step 3: Remove the Bonnet Nut
Using an adjustable wrench, loosen and remove the bonnet nut that holds the cartridge in place. This nut is located directly under the handle.
Step 4: Remove the Cartridge
Using needle-nose pliers, grip the top of the cartridge and pull it straight out of the faucet. If the cartridge is stuck, you may need to use a pair of pliers to wiggle it loose.
Step 5: Install the New Cartridge
Insert the new RP50587 cartridge into the faucet, making sure it is properly aligned. Push it in firmly until it clicks into place.
Step 6: Reinstall the Bonnet Nut
Using an adjustable wrench, tighten the bonnet nut back into place, being careful not to over-tighten it.
Step 7: Reinstall the Handle
Slide the handle back onto the faucet stem and secure it in place with the screw you removed earlier.
Step 8: Turn On the Water
Finally, turn the water supply back on by turning the shutoff valves counterclockwise. Test the faucet to make sure the new cartridge is working properly.
Conclusion
Replacing your Delta faucet’s RP50587 cartridge is a relatively simple process that can help restore your faucet’s functionality. By following these step-by-step instructions, you can replace the cartridge yourself and save money on professional plumbing services.